Lost Wax Casting OEM Mechanical Part Fabrication and Machining
Lost wax casting is the process by which a duplicate metal sculpture is cast from an original sculpture. No matter to give professional advice in moulding or inspect values of incoming materials, or to machining castings to meet your final requirements. Precise magnesium, brass, zinc, titanium, aluminum lost wax casting can be provided right here in Molto.
Lost-wax casting (also called "investment casting", "precision casting", or cire perdue in French) is the process by which a duplicate metal sculpture (often silver, gold, brass or bronze) is cast from an original sculpture. Dependent on the sculptor's skills, intricate works can be achieved by this method. Many materials can do casting parts such as: magnesium lost wax casting, brass lost wax casting, zinc lost wax casting, titanium lost wax casting, aluminum lost wax casting.
Application:
1) machinery parts
2) mining equipment
3) pump parts
4) auto & motorcycle parts
5) tool parts etc.
Heat Treatment
1)Normalizing
2)Annealing
3)Tempering
4)Solid Solution Heat treatment
5)Aging
6)Quenching
7)Gas Nitriding
8)Carbonization
Surface Treatment
1)Sand blasting
2)Zinc/Chrome/Nickel plating
3)Powder coating
4)Anodizing
5)Galvanized
6)Painting
7)Oxidation
8)Mirror Polish
Casts can be made of the wax model itself, the direct method, or of a wax copy of a model that need not be of wax, the indirect method. These are the steps for the indirect process:
Model-making. An artist or mould-maker creates an original model from wax, clay, or another material.
Mouldmaking. A mould is made of the original model or sculpture. The rigid outer moulds contain the softer inner mould, which is the exact negative of the original model. Inner moulds are usually made of latex, polyurethane rubber or silicone, which is supported by the outer mould.
Wax. Once the mould is finished, molten wax is poured into it and swished around until an even coating, usually about 1⁄8 inch (3 mm) thick, covers the inner surface of the mould.
Removal of wax. This hollow wax copy of the original model is removed from the mould.
Recommendation:
Medical Machining: http://www.molto-engineering.com/parts-manufacturing/china-medical-dental-machining.html
Custom Sensor Housing: http://www.molto-engineering.com/parts-manufacturing/custom-sensor-housing-manufacturer.html
Machinery part: http://www.molto-engineerings.com/parts-manufacturing/machinery-part.html